This is the CPE's config

# rem list
INFORMATION FOR <co>
  Status............................... enabled
  Protocol in use...................... RFC1483 (SNAP)
  ATM traffic shaping...................no
  Connection Identifier (VPI*VCI)...... 0*38
  IP address translation............... off
  IP filters defined................... no
  Send/Receive Multicast............... off
  Block NetBIOS Packets................ off
  Source IP address/subnet mask........ 192.168.254.2/255.255.255.252
  Remote IP address/subnet mask........ 192.168.254.1/255.255.255.252
  Send IP RIP to this dest............. no
    Send IP default route if known..... no
  Receive IP RIP from this dest........ no
    Receive IP default route by RIP.... no
  Keep this IP destination private..... yes
  Total IP remote routes............... 1
           0.0.0.0/255.255.255.255/1
  IPX network number................... 00000000
  Total IPX remote routes.............. 0
  Total IPX SAPs....................... 0
  Bridging enabled..................... no
    Exchange spanning tree with dest... yes
# eth list
GLOBAL BRIDGING/ROUTING SETTINGS:
  Bridging enabled..................... no
    Exchange spanning tree with dest... yes
  IP Routing enabled................... yes
    Multicast forwarding enabled....... no
    Firewall filter enabled ........... yes
    Directed Broadcasts Allowed........ no
    RIP Multicast address.............. default
  IPX Routing enabled.................. no

ETHERNET INFORMATION FOR <ETHERNET/0>
  Hardware MAC address................. 04:7E:64:34:33:2D
    Send IP RIP to the LAN............. no
      Advertise me as default router... no
    Process IP RIP packets received.... no
      Receive default route by RIP..... no
    IP filters defined................. no
  IP address/subnet mask............... 192.168.2.1/255.255.255.0
  Static Ethernet routes defined....... none
  IPX External network number.......... 00000000
  IPX Frame type....................... 802.2
#